HOW: Replace turn lights

[Pancho]

This one is easy, but someone has to do it![:I]

Tools needed: just a Phillips screwdriver!

What to do:

1- Unscrew the Phillips screw
Attached Image: http://F800Riders.org/forum_old/UPLOADED/pancho/200751622297_DSC_1618.JPG

2-Remove cover

Attached Image: http://F800Riders.org/forum_old/UPLOADED/pancho/2007516222940_DSC_1619.JPG

3- And voila, there is the bulb.

Attached Image: http://F800Riders.org/forum_old/UPLOADED/pancho/2007516223011_DSC_1620.JPG

Now if you want to go a little bit forward, here's how you can disconnect wires so you can remove the fairing (fairing removal for tomorrow :D)

Extra tool needed: small flat screwdriver
4- With a flat screw driver remove bulb holder, as seen on previous picture

5- Release wires with your finger or (extra tool needed: small pliers) small pliers.

Attached Image: http://F800Riders.org/forum_old/UPLOADED/pancho/2007516223316_DSC_1622.JPG

After this you have to carefully pull wires from behind fairing.

Hope you find this useful, and if necessary PM me that I'll be glad to answer.

[Rob]

Added to the Hall of Wisdom - 7/22/07

[Rob]

This also applies to how to install LED side lighting as well. it just plugs in instead of the silver part / blub.