IIRC they are a standard H7 fitment for Low & high beam, so anywhere sells those. I recommend the Osram Nightbreaker bulbs - Amazon generally have a...
Probably best to do that first and make sure it's not causing any excess air to enter the combustion chamber. Also check the ICV vacuum hoses are not...
Adjusting the throttle cable at the bottom end will cause stalling if the ICV is trying to work, as too much air is getting in and it will be running...
I am assuming when you say rolling off the throttle, this is when you have dipped the clutch and the throttle is closed? So the bike would be running...
Despite the cold, i got a quick 40 mile loop in today. Obviously in the cold temperatures i was not pushing it, or near the extremities of grip - but...
Have you wired the fuzeblock in to the bikes wiring (the GPS harness/trigger wire) so it switches on/off with the ignition? If not i would say yes it...
i've ordered a set of these now my 2CT's have ran out. i'm hoping they live up to what i've read regarding the good grip levels & decent mileage. I'm...
Did you check and calibrate the ICV as this is usually the culprit. It loses its position and needs calibrating to rest back to the correct position....