BMW F800 Forum banner

ST handlebar 'risers'?

2K views 9 replies 7 participants last post by  DJR 
#1 ·
Is there a 'non-boutique' brand handlebar riser that works on a F800ST?
I want it a bit up and a bit back.
 
#3 ·
#5 ·
If you look at where the brake line goes down to the yoke, the non ABS bikes just splits into 2 and goes directly to the calipers. The splitter is screwed to the yoke. I just uncrewed it and used the slack that will be needed if you raise the handlebar. I then zip tied the lines to the yoke since the splitter is now above where it used to screw in. The ABS version has another line running off the slitter which doesn't have slack.
 
#6 ·
I paid the huge ROX price when I got them for the ST. Worked well. There was a post on the forum by someone in Northern Europe that explained how to route the brake lines.
The change in position made the ride mo bettah.
I picked a couple other risers from the Wee Strom forum plus a nifty hat for $15. I put them on my G650GS and my DL650. Sometimes you get a lucky find.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top